Deck Paint | Colors | Types | Removal
Overdoing things often does not bring excellence in sumptuous quantities; try teaching a kid too much or put him under too much of a restriction and your bright plans are bound to backfire. Similarly, all those who are proud about keeping their decks spic-n-span by staining it frequently must learn a thing or two about deck paints and painting a deck first. This will, however; keep pool deck paint and related affairs aside; things are different when moisture is high.
No doubt such care make a deck’s finish appear holding up impressively, but when it starts failing it messes things up beyond imagination. Applying deck paint at will is no way passing the time; let’s see what extra care does to your deck.
Those over-painting a deck are also in a habit of over-coating to bring in the precision. That’s irrespective of whether the stain is transparent, partially transparent or the semi-solid alkyd type; however, these deck paint are often single-coat systems that go into the wood. The extra coats are thus, wastage of material and contrary to the popular belief, do not impart any extra durability but chokes the wood by sitting on top of the previous coat. The slight sheen occurs due to the previous coat of deck paint not being absorbed fully into the wood fibers and would flake and peel as it dries, taking the upper coat along with.
So, how about putting an extra coat after the initial one dries completely? It’s going to be the same, for it will just dry on top of the dried coat and won’t be absorbed. The bottom line is: If the deck paint seems to be holding good, there’s no need repainting. And also keep in mind the possibilities of an entire stripping off session to put right the peel.
At times, it’s also the moisture. You must know that before you clean your deck. The easy way out definitely stays pressure-washing (we are free mostly on weekends) but the price one pays for that is too high. The water loosens the wood’s fibers which entraps water within; unless it’s a thorough drying, the water and stain might get mixed for some seriously bitter results. A weekend-to-weekend long span in dry weather is essential for drying; wood deck paint is water for thirsty wood fibers.
That, however, doesn’t mean throwing it under a scorching Sun; the deck paint will dry too quick, making overlapping stain/paint spots prominent. The best time thus is to start at Sunrise, unless the dew is still present. Things must be packed up at 11 a.m. sharp. If the job stays unfinished, 4p.m. in the afternoon is again a good time to start. This is when one may well-maintain the 50 to 90 degrees F temperature outdoors. A good way to know that is if the wood is too hot for your hands. Unless you are comfortable touching it, neither would be the stain.
Natural humidity turns it longer for the deck paint to dry and windy days simply drive the dust and debris in. So first and foremost, painting a deck will require striking a balance among the three weather conditions; the rest depends on how well you follow the deck paint manufacturer’s guidelines and think back on the above info.